| Part 2：Non-Ferrous Alloy |
02-1010 |
Effect of Convection Solidification on the Halo Formation in Zn-Al Alloys
|
| Wenchao Yang, Shouxun Ji |
02-1014 |
Effect of As-Cast Microstructure on Precipitation Behavior and Thermal Conductivity of Al-Si-Mg Alloys
|
| Saif Haider Kayani, Kwangjun Euh, Jung-Moo Lee, Young-Hee Cho |
02-1065 |
New Viewpoints on the Oxide Film Defects in Advanced Alloy Casting
|
| Lunyong Zhang, Fuyang Cao, Jianfei Sun |
02-1067 |
Research on the Application of A356.0 Aluminum Alloy Semi Solid Slurry Technology in Gravity Casting
|
| Lijun Hu, Yuxiao Zhu, Haichao Zhang |
02-1073 |
Research Progress on Semi-Continuous Casting of Magnesium Alloys under External Field
|
| Qichi Le, Qiyu Liao, Dazhi Zhao, Lei Bao, Tong Wang, Yonghui Jia |
02-1075 |
The Application of X-ray Flaw Detection Machine in Casting Quality Control
|
| Yibin Li, Dianpeng Jia |
02-1087 |
Research and Optimization of the Conditions of the Melting and CastingProcess of Bearing Alloys Intended for Sliding Layers of Bearing Shells
|
| A. Brudny, M. Maleta, B. Cwolek, J. Kulasa, W. Malec |
02-1094 |
Investigation of the Properties of Carbon Product Prototypes in Real Conditions Conducted in the Process of Melting and Continuous Casting of Non-Ferrous Metals Simulating Real Conditions
|
| B. Juszczyk, A. Brudny, J. Kulasa, R. Wycisk |
02-1107 |
Study on the Microstructure and Hardness of Mg-4Al-4RE-0.3Mn Alloy in High Vacuum Die Casting under Aging
|
| Yongfeng Li, Ang Zhang, Chuangming Li, Hecong Xie, Bin Jiang, Zhihua Dong, Fusheng Pan |
02-1116 |
Microstructural Characterization and Optimization of CoCrCuFeMnNi High Entropy Alloy to be in Contact with Hydrogen
|
| O. Gordo-Burgoa, P. Garcia-Michelena, L. Armendariz, I. Vicario, E. Mardaras, G. Arruebarrena, I. Hurtado |
02-1130 |
Research of Hybrid Aluminium Castings with the Use of Porous Cores
|
| Marek Bruna, Martin Medňanský, Miloš Mičian, Peter Oslanec |
02-1146 |
Effect of Electro-Pulse on Microstructure of Al-Cu-Mn-Zr-V Alloy During Aging Treatment
|
| Dequan Shi, Wenbo Yu, Guili Gao |
02-1152 | Effects of Interface on Mechanical Propertiesof High-Entropy Alloy Particle-Reinforced Stainless Steel Through Molecular Dynamic Simulation |
| Dezhu Zhang, Haijun Huang |
02-1154 | Unveiling the Origin of Severe Hot Cracking Susceptibility in Al-Li Alloys |
| Liang Zhang, Youjie Guo, Guohua Wu |
02-1159 | The Effect of Fe Content on the Microstructure and Properties of T6-Treated A356 Aluminum Alloy |
| Dongyang Yang, Dongfu Song, Chuanyao Tang, Weiwen Zhang, |
02-1174 | Latest Advancements and Prospects in TIG Repair Welding of Sand-Cast Magnesium Rare-Earth Alloys |
| Xin Tong, Guohua Wu, Wenjiang Ding |
02-1187 | Microstructure Evolution of Immiscible Alloy Solidified Under the Effect of Composite Electric and Magnetic Fields |
| Hongxiang Jiang, Yanqiang Li, Jiuzhou Zhao, Lili Zhang, Jie He |
02-1197 | Al-Si Divorced Eutectic Solidification in Hypereutectic Al-Si Alloy by Counter-Gravity Casting |
| Chengcheng Han, Hao Huang, Yuna Wu, Hengcheng Liao |
02-1203 | Effect of Trace Mounts of Zr on Microstructure and Properties of K4169 Alloy |
| Jingyu Zhang, Qian Du, Qinrui Zhang, Keyan Xia, Yamin Li, Yi Chen |
02-1206 | Microstructure and Mechanical Properties of Magnetic Levitation Fabricated Cu-Ni-Co Multi-principal Element Alloys |
| Chengyuan Zhu, Zhiqiang Fu |
02-1208 | Enhancing Mechanical Performance and Cavitation Erosion-Corrosion Resistance in fcc Multi-Principal Element Alloy Through L12 Precipitates |
| Jiacheng Niu, Zhiqiang Fu |
02-1209 | Effect of Al Content on Microstructure and Mechanical Behavior of As-Cast Ni35(CoCr)62-xAlxTi3 High-Entropy Alloys |
| Liran Huang, Zhiqiang Fu |
02-1217 | The Influence of Chemical Composition on TiC Particle Distribution in In-Situ Al-Based Cast Composites |
| Ewa Olejnik, Paweł Kurtyka, Agnieszka Czajka, Robert Chulist, Karol Janus, Łukasz Szymański, Wojciech Maziarz |
02-2035 | Formation Mechanism of Cellular Structure of NiCoCrFeAl Eutectic High-Entropy Alloys by Selective Laser Melting |
| An Xie, Huan Yu, Zhijun Wang, Junjie Li, Jincheng Wang, Feng He |
02-2036 | Cooling Rate Dependence of Iron-Rich Phase in A356 Aluminum Alloy and Its Effect on Mechanical Properties |
| Yunxia Niu, Lizhi Zhang, Jie Wan, Yuzeng Chen |
02-2043 | Evolution of Divorced Eutectic Structure in NiCoCrFeAl Eutectic High Entropy Alloy by Selective Laser Melting |
| An Xie, Zhijun Wang, Jincheng Wang, Feng He |
02-2061 | Effect of Al Content on Microstructure and Mechanical Properties of As-Cast Mg-Gd-Y-Yb-Zn Alloys |
| Yamin Wang, Yicheng Feng, Yuanke Fu,Lei Wang, Erjun Guo |
02-2097 | Influence of Ca on Thermal Expansion and Mechanical Properties of Mg |
| Cuihong Wang, Zhihua Dong, Bin Jiang |
02-2113 | Quantitative Analysis of Graphite in Cast Iron Based on Deep Learning and Digital Image Processing |
| Pingping Li |
02-2114 | Research on Double Stage Solid Solution/Aging Heat Treatment Process of High Strength AlCu5Mn Alloy |
| Xiangping Li, Juncheng Ma, Shaohua Xia, Jialin GONG,Yongxiang Xu |
02-2119 | Divorced Growth of Eutectic Solidification of Hypereutectic Al-Si Alloy in Sand Casting and Its Influence on Mechanical Properties |
| Hengcheng Liao, Tianrui Yan, Yuna Wu |
02-2120 | Recent Developments and Prospects on the Research and Application of Cast Magnesium Rare-Earth Alloys |
| Guohua Wu, Xin Tong, Wenjiang Ding |
02-2129 | Effect of Al Solution and Precipitation on Strength and Plasticity in Mg-Li-Al |
| Guoning Bai, Hua Hou, Yuhong Zhao |
02-2142 | Phase Field Method to Study The Mechanism of Cu-Rich Phase Precipitation in AlxCuMnNiFe High-Entropy Alloy |
| Kaile Wang, Wenkui Yang, Xincheng Shi, Hua Hou,Yuhong Zhao |
02-2144 | BCC Precipitates Induced Strength-Ductility Balance in Al5Ti2.5Fe25Cr25Ni42.5 High Entropy Alloy |
| Xiaotao Xu, Hua Hou, Yuhong Zhao |
02-2146 | Multiple Strengthening Mechanisms Lead to an Excellent Strength-Ductility Combination of Ni-Rich High-Entropy Alloy for Multiple Temperature Applications |
| Xiaoyang Zhang, Jinchen Yang, Huanqing Li, Ruifeng Dong, Hua Hou, Yuhong Zhao |
02-2147 | Segregation Defect Analysis for Magnesium Alloy Structural Parts in Squeeze Casting Technology |
| Yuan Zhao, Liwen Chen, Hua Hou, Yuhong Zhao, Jianhui Jing |
02-2166 | Microstructure and Mechanical Properties of Extruded Mg-Y-Zn-Ni-Co Alloy |
| Binxin An, Jing Jiang, Haobin Xu, Yuandong Li, Tijun Chen, Guangli Bi |
02-2167 | Morphology, Structure and Composition of Precipitated Phase in As-Cast Fe35Ni35Cr20Mn10Ti6 High Entropy Allo |
| Mengchuan Shi, Hengcheng Liao |
02-2170 | Exploring Microstructure Evolution and Machine-learning Method During Hot Deformation of 56Ni-32Ti-12Hf Alloy |
| Chunzhe Fu, Hongjun Huang, Ge Zhou, Xiaojiao Zuo, Bowen Zheng, Xiaoguang Yuan |
02-2172 | Study on High Temperature Deformation Behavior and Deformation Mechanism of a Ti-47.5Al-2.5V-1.0Cr-0.2Zr Alloy |
| Xuejian Lin, Hongjun Huang, Xiaoguang Yuan, Bowen Zheng, XiaojiaoZuo, Ge Zhou |
02-2173 | Effect of Alloying Elements and Liquid Film in Late Solidification Stage on Hot Tearing of Al-Cu Alloy |
| Chunyu Yue, Bowen Zheng, Ming Su, Xiaojiao Zuo, Xiaoguang Yuan |
02-2176 | Magnesium on the Brink or Beginning of a New Era? |
| Christoph Schendera, Gerhard Geishüttner, Andreas Kraly |
02-2177 | Analysis and Solution of Macroscopic Segregation of Mn-containing Phase in Sand Casting of AZ91 Magnesium Alloy |
| Shiwei Xin, Zehua Li, Zhijun Feng, Yufei Li,Ming Ruan,Licheng Zhou,Xiao Li |
02-2192 | Increasing Mechanical Properties of Mg-Y alloy by Adding TiB2-Al2Y Particles |
| Kun Zhang, Yuyang Gao, Ang Zhang, Zhihua Dong, Yan Yang, Jiangfeng Song, Bin Jiang, Fusheng Pan |
02-2203 | Microstructural Modification in Aluminum Alloys by Means of a Low Frequency Electromagnetic Field Applied During the Solidification |
| D. Abedul, I. Hurtado, N. Herrero, G. Arruebarrena, P. Garcia, Z Azpilgain, P. Rodriguez |
02-2206 | Effect of Cr Element on Microstructure and Mechanical Properties of Ti8Zr6Nb4V5Crx Lightweight High Entropy Alloys |
| Qin Xu, Chengyuan Guo, Qi Wang, Yajun Yin, Ruirun Chen |
02-2217 | Sanxingdui Bronze Civilization and Bronze Casting Technology System |
| Jianbo Guo, Qiutong Cai, Jianjun Mei, Marcos Martinón-Torres |
02-2260 | Research on High-performance Precision Casting Technology for Large and Complex Titanium Alloys |
| Y. C. Lou，J. Zhao，S. B. Liu，T. Y. Liu |
02-2267 | Study on the Thermal Deformation Behavior and Collaborative Recrystallization Mechanism for a Coarse-Grained Near-β Titanium Alloy Ti6455x |
| Jiaqi Hao, Jichang Yu, Hongze Fang, Ruirun Chen |
02-2271 | A Novel β-Ti Alloy with Both Strength and Toughness Designed Based on Mo Equivalent and d-Electron Theory |
| Yili Li, Shichen Sun, Xiang Xue, Hongze Fang, Ruirun Chen |
02-2272 | Influence of Tantalum on the Microstructure and Properties of Ti-46Al-8Nb-1.5Cr Alloy |
| Jiangshan Liang, Liao Mi, Lingyan Zhou, Hongze Fang, Ruirun Chen |
02-2274 | Influence of Nb Modification on the Superplastic Behavior and Mechanical Properties of Titanium Alloy at 650 ℃ |
| Shichen Sun, Hongze Fang, Yili Li, Ruirun Chen |
02-2279 | Introduction of Surface Defects in the γ Phase Improves the Mechanical Properties of TiAl Alloys |
| Xiaokang Yang, Linyan Zhou, Jiangshan Liang, Hongze Fang, Ruirun Chen |
02-2281 | Preparation of In-Situ TiB Reinforced Titanium Alloys with Fine TiB Phase Via Ultrasound-Assisted Fusion Casting |
| JichangYu, Yili Li, Shichen Sun, HongzeFang, RuirunChen |
02-2287 | Study on the Microstructure and Properties of Cast High-Temperature Titanium Alloy Based On Cluster Model Design |
| Tianyu Liu, Xinqi Li, Weichen Qiu, Hongyu Liu, Hongyu Liu, Shibing Liu, Kun Shi |
